Advantech RAID Setup

Advantech RAID Setup

Symptom:

You have just received two new SATA HDD/SDD 2.5" drives and you need configure a RAID setup on an Advantech UNO machine.


Environment:

Primary Product Module : Advantech UNO

Primary Product Version : BIOS / RAID Configuration utility



Solution:
Please follow the steps listed in the images below.



    • Related Articles

    • AC Power Recovery BIOS setting

      Symptom You want your Advantech UNO-2484G brick computers to power on when AC power is detected, but cannot find the setting in the system's BIOS. Environment Primary Product Module: Advantech Primary Product Version: UNO-2484G Cause The AC power ...
    • Multi-Monitor Setup

      Scenario Setting up a multi-monitor (3 screen) system using different types of monitors (e.g. Dell Monitors + iTech touchscreen, 3 iTech touchscreens, etc.) Environment Primary Product Module : Advantech UNO-2483G/2484G Primary Product OS : Windows ...
    • APC 700 UPS with PowerChute software/Setup

      SETUP 1)      Connect PC power supply to the UPS (rear, left hand side) MASTER AC POWER (top outlet) 2)      Connect the Data to USB cord (provided with Back-UPS) to the UPS (Data Port) and the USB side of cable to your PC 3)      IMPORTANT – Be sure ...
    • ESXi Installation Stopped: partedUtil Failed

      Symptom: When installing ESXi on a Dell Poweredge for a Control Server system, the ESXi OS installation on the host fails almost immediately, showing an error message similar to this: Environment: GE Control Server - HA/Simplex Dell Poweredge R430 / ...
    • Restoring an MC3 when MC2 Datastore Disk Fails but MC2 Backup Datastore Disks Still Healthy

      How to Restore a Lost MC3 that was hosting Veeam Backup using its Veeam backup Scenario: MC2 Datastore Drive Fails, wiping out OS, MC3 Veeam configuration, and the HW1 VM MC2 Backup datastore drives still healthy (holding the backups). All you have ...